May 2011 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun May 1 10:54:31 EST 2011
Ending: Tue May 31 22:27:25 EST 2011
Messages: 159

• [Makers] Space open.   shinobi.jack at gmail.com
• [Makers] Space closed.   shinobi.jack at gmail.com
• [Makers] Site open for an hour. 4pm   Chris Wolfe
• [Makers] Dickson College UAV and Robotics Open Night - May 17th   Moss, Andrew
• [Makers] [clug] [OT] View of "Make-hack-void" by a VC   Angus Gratton
  • [Makers] [clug] [OT] View of "Make-hack-void" by a VC   Christopher Lee
• [Makers] CNC3030 Mill sacrificial bed   Alastair D'Silva
  • [Makers] CNC3030 Mill sacrificial bed   Christopher Lee
  • [Makers] CNC3030 Mill sacrificial bed   Adam Thomas
    • [Makers] CNC3030 Mill sacrificial bed   Alastair D'Silva
• [Makers] [Committee] Safety & working alone in the space   Christopher Lee
• [Makers] Micro Quadrocopter (HaD)   Chris Wolfe
• [Makers] Spaceport is open till 7   Chris Wolfe
• [Makers] CLUG visits Canberra Makers - May 26th?   Paul Wayper
• [Makers] Space open from 6:30   Adam Thomas
• [Makers] Space Port will be open to passengers from 7pm tonight.   Chris Wolfe
• [Makers] Our library   Alastair D'Silva
• [Makers] Multi-touch table with Eiki lc-xip2000 interactive video projector   Luis Felipe Arango
• [Makers] Space is open   Alastair D'Silva
  • [Makers] Space is open   Angus Gratton
• [Makers] Hose left outside   Alastair D'Silva
  • [Makers] Hose left outside   Alastair D'Silva
• [Makers] CNC3030 now has Wifi   Alastair D'Silva
• [Makers] Website down?   Elena Williams
  • [Makers] Website down?   Chris Lee
    • [Makers] Website down?   Elena Williams
  • [Makers] Website down?   Lemming .
  • [Makers] Website down?   Angus Gratton
    • [Makers] Website down?   Angus Gratton
• [Makers] 24V PSU   Alastair D'Silva
  • [Makers] 24V PSU   Lemming .
  • [Makers] 24V PSU   shinobi.jack at gmail.com
  • [Makers] 24V PSU for the CNC3030   Alastair D'Silva
• [Makers] CNC3030 Progress   Alastair D'Silva
• [Makers] Neodymium magnet strength   Alastair D'Silva
• [Makers] LED lighting strips for the Roland CNC engraver   Alastair D'Silva
  • [Makers] LED lighting strips for the Roland CNC engraver   Adam Thomas
    • [Makers] LED lighting strips for the Roland CNC engraver   Alastair D'Silva
• [Makers] CAM source for interchangable base plates for the CNC3030 mill   Alastair D'Silva
• [Makers] Stanford CS223A - Introduction to Robotics Lectures   Alastair D'Silva
  • [Makers] Stanford CS223A - Introduction to Robotics Lectures   Matt Evans
• [Makers] books for the library - need advice   ourstuff888 at gmail.com
  • [Makers] books for the library - need advice   Alastair D'Silva
  • [Makers] books for the library - need advice   Angus Gratton
• [Makers] SchmartBoard SMD to DIP adaptors   Christopher Lee
• [Makers] The MHV space is now open for approximately 1/2 hour (~22:01)   MHV Space Probe
• [Makers] MHV Space Probe now in (beta) operation   Angus Gratton
  • [Makers] MHV Space Probe now in (beta) operation   Angus Gratton
• [Makers] The MHV space is now closed (was open 23 minutes)   MHV Space Probe
• [Makers] Roland CNC engraver now has lights!   Alastair D'Silva
  • [Makers] Roland CNC engraver now has lights!   Adam Thomas
    • [Makers] Roland CNC engraver now has lights!   Chris Wolfe
• [Makers] Anyone want a Fisher & Paykel washing machine (for the motor)?   Angus Gratton
• [Makers] Bakelite panel meters   Adam Thomas
• [Makers] Hand Moulding Plastic   Owen
  • [Makers] Hand Moulding Plastic   Christopher Lee
    • [Makers] Hand Moulding Plastic   Chris Wolfe
• [Makers] Space port will be open at 7 by me.   Chris Wolfe
• [Makers] The MHV space is now open for approximately 1/4 hour (~19:16)   MHV Space Probe
• [Makers] The MHV space is now closed (was open 41 seconds)   MHV Space Probe
• [Makers] The MHV space is now open for approximately 1/2 hour (~19:44)   MHV Space Probe
• [Makers] The MHV space is now closed (was open 10 minutes)   MHV Space Probe
• [Makers] The MHV space is now open for approximately 0 hour (~19:29)   MHV Space Probe
  • [Makers] The MHV space is now open for approximately 0 hour (~19:29)   Angus Gratton
    • [Makers] The MHV space is now open for approximately 0 hour (~19:29)   Chris Wolfe
      • [Makers] The MHV space is now open for approximately 0 hour (~19:29)   Angus Gratton
      • [Makers] The MHV space is now open for approximately 0 hour (~19:29)   Chris Wolfe
• [Makers] somewhat off topic - plastic (?) 50mm "U" beams   Ben D
  • [Makers] somewhat off topic - plastic (?) 50mm "U" beams   Mish9000
    • [Makers] somewhat off topic - plastic (?) 50mm "U" beams   Christopher Lee
    • [Makers] somewhat off topic - plastic (?) 50mm "U" beams   Ben D
  • [Makers] somewhat off topic - plastic (?) 50mm "U" beams   Jack Pittar
• [Makers] The MHV space is now open for approximately 1/2 hour (~18:00)   MHV Space Probe
  • [Makers] The MHV space is now open for approximately 1/2 hour (~18:00)   Angus Gratton
• [Makers] The MHV space will remain open for approximately another 1 1/2 hours (~19:59)   MHV Space Probe
  • [Makers] The MHV space will remain open for approximately another 1 1/2 hours (~19:59)   Chris Wolfe
• [Makers] SciCamp   Alastair D'Silva
• [Makers] The MHV space will remain open for approximately another 1/2 hour (~20:29)   MHV Space Probe
• [Makers] makerbot art   Eyal Lebedinsky
• [Makers] Arduino/MHV board/MHV table at the open night   Moss, Andrew
  • [Makers] Arduino/MHV board/MHV table at the open night   Alastair D'Silva
    • [Makers] Arduino/MHV board/MHV table at the open night   Matt Evans
      • [Makers] Arduino/MHV board/MHV table at the open night   Ryan Leach
• [Makers] The MHV space will remain open for approximately another 1 hour (~18:44)   MHV Space Probe
• [Makers] Space probe issues post-mortem   Angus Gratton
  • [Makers] Space probe issues post-mortem   Chris Wolfe
• [Makers] The MHV space is now closed (was open 18 minutes)   MHV Space Probe
• [Makers] Possible "Working w/ FPGAs" introduction/presentation   Angus Gratton
  • [Makers] Possible "Working w/ FPGAs" introduction/presentation   Matt Evans
    • [Makers] Possible "Working w/ FPGAs" introduction/presentation   James Finniss
    • [Makers] Possible "Working w/ FPGAs" introduction/presentation   shinobi.jack at gmail.com
    • [Makers] Possible "Working w/ FPGAs" introduction/presentation   Angus Gratton
  • [Makers] Possible "Working w/ FPGAs" introduction/presentation   Eyal Lebedinsky
• [Makers] The MHV space is now open for approximately 1 1/2 hours (~17:15)   MHV Space Probe
• [Makers] Plastic binder sleeves?   Angus Gratton
• [Makers] The MHV space is now closed (was open 4 minutes)   MHV Space Probe
• [Makers] The MHV space is now open for approximately 1 1/2 hours (~13:29)   MHV Space Probe
• [Makers] The MHV space is now closed (was open 63 minutes)   MHV Space Probe
• [Makers] FW: Fire Safety Training   Alastair D'Silva
• [Makers] Technical Aid to the Disabled ACT   Adam Thomas
• [Makers] Extruder controller for 3D printing needed   Adam Thomas
  • [Makers] Extruder controller for 3D printing needed   Angus Gratton
    • [Makers] Extruder controller for 3D printing needed   Alastair D'Silva
• [Makers] "How to Post Your Project" on www.makehackvoid.com, correction   Angus Gratton
• [Makers] The MHV space is now open for approximately 4 1/2 hours (~21:58)   MHV Space Probe
• [Makers] Robot Wall (of awesome)   Jess Drake
  • [Makers] Robot Wall (of awesome)   Chris Wolfe
    • [Makers] Robot Wall (of awesome)   Christopher Lee
  • [Makers] Robot Wall (of awesome)   Angus Gratton
    • [Makers] Robot Wall (of awesome)   Jess Drake
      • [Makers] Robot Wall (of awesome)   Chris Wolfe
      • [Makers] Robot Wall (of awesome)   Adam Thomas
• [Makers] The MHV space is now open for approximately 3 1/2 hours (~21:44)   MHV Space Probe
• [Makers] The MHV space will remain open for approximately another 1 1/2 hours (~23:15)   MHV Space Probe
• [Makers] The MHV space is now closed (was open 4 1/2 hours)   MHV Space Probe
  • [Makers] The MHV space is now closed (was open 4 1/2 hours)   MHV Space Probe
  • [Makers] The MHV space is now closed (was open 4 1/2 hours)   MHV Space Probe
• [Makers] Lock installed   Adam Thomas
• [Makers] Friday Welding   Adam Thomas
• [Makers] The MHV space is now open for approximately 3 hours (~12:29)   MHV Space Probe
• [Makers] The MHV space is now closed (was open 172 minutes)   MHV Space Probe
• [Makers] Uninstalled (was Re: Lock installed)   Adam Thomas
• [Makers] Hackerspace will be open this afternoon   Angus Gratton
  • [Makers] Hackerspace will be open this afternoon   Chris Wolfe
• [Makers] The MHV space is now open for approximately 3 hours (~18:17)   MHV Space Probe
• [Makers] Doorbell!   Angus Gratton
  • [Makers] Doorbell!   Christopher Lee
    • [Makers] Doorbell!   Angus Gratton
• [Makers] The MHV space will remain open for approximately another 1 1/2 hours (~19:29)   MHV Space Probe
• [Makers] The MHV space will remain open for approximately another 0 hour (~19:44)   MHV Space Probe
• [Makers] LED Display boards   James Finniss
• [Makers] CLUG / Maker meet this Thursday (reminder)   Chris Wolfe
• [Makers] Hackerspace open this evening   Angus Gratton
• [Makers] The MHV space is now open for approximately 1 3/4 hours (~19:29)   MHV Space Probe
• [Makers] The MHV space will remain open for approximately another 1 1/4 hours (~20:44)   MHV Space Probe
• [Makers] The MHV space is now closed (was open 16 seconds)   MHV Space Probe
• [Makers] The MHV space is now closed (was open 17 seconds)   MHV Space Probe
  • [Makers] The MHV space is now closed (was open 17 seconds)   Angus Gratton
• [Makers] The MHV space is now open for approximately two hours (~21:29)   MHV Space Probe
  • [Makers] The MHV space is now open for approximately two hours (~21:29)   MHV Space Probe
• [Makers] The MHV space will remain open for approximately another an hour (~22:43)   MHV Space Probe
  • [Makers] The MHV space will remain open for approximately another an hour (~22:43)   MHV Space Probe
• [Makers] The MHV space is now closed (was open 3 1/2 hours)   MHV Space Probe
  • [Makers] The MHV space is now closed (was open 3 1/2 hours)   MHV Space Probe
• [Makers] The MHV space is now open for approximately five hours (~22:30)   MHV Space Probe
  • [Makers] The MHV space is now open for approximately five hours (~22:30)   MHV Space Probe
• [Makers] The MHV space will remain open for approximately another 3/4 of an hour (~23:00)   MHV Space Probe
  • [Makers] The MHV space will remain open for approximately another 3/4 of an hour (~23:00)   MHV Space Probe
• [Makers] Duplicate email apologies   Angus Gratton
• [Makers] The MHV space is now closed (was open 146 minutes)   MHV Space Probe
• [Makers] Deathbot agreement signed between UC and Dickson College. (Or in otherwords cool spelling mistake lol)   Chris Wolfe
• [Makers] Intermec 6651 Handheld PC   Luis Felipe Arango
  • [Makers] Intermec 6651 Handheld PC   Angus Gratton
    • [Makers] Intermec 6651 Handheld PC   Luis Felipe Arango
• [Makers] Reminder: "Getting Started w/ FPGAs" this Tuesday   Angus Gratton
• [Makers] Walkthrough on reverse engineering firmware images   Angus Gratton
• [Makers] The MHV space is now open for approximately 4 1/2 hours (~22:16)   MHV Space Probe
• [Makers] Whiteboard Transcript (Vol The First)   Angus Gratton
• [Makers] The MHV space will remain open for approximately another 3/4 of an hour (~22:43)   MHV Space Probe

Last message date: Tue May 31 22:27:25 EST 2011
Archived on: Tue May 31 22:27:41 EST 2011

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...