March 2011 Archives by subject
Starting: Tue Mar 1 08:20:04 EST 2011
Ending: Thu Mar 31 23:23:34 EST 2011
Messages: 273
- [Makers] $25 + shipping for a Belkin N300 router, apparent support by DD-WRT
Alastair D'Silva
- [Makers] $25 + shipping for a Belkin N300 router, apparent support by DD-WRT
Angus Gratton
- [Makers] 32bit embedded platforms
Alastair D'Silva
- [Makers] 32bit embedded platforms
Lemming .
- [Makers] 32bit embedded platforms
Alastair D'Silva
- [Makers] 32bit embedded platforms
Matt Evans
- [Makers] 32bit embedded platforms
Alastair D'Silva
- [Makers] 32bit embedded platforms
Matt Evans
- [Makers] 8mm threaded rod
Alastair D'Silva
- [Makers] 8mm threaded rod
shinobi.jack at gmail.com
- [Makers] 8mm threaded rod
jm
- [Makers] 8mm threaded rod
Alastair D'Silva
- [Makers] [1/?] Machine names...
Brad Hards
- [Makers] [1/?] Machine names...
Alastair D'Silva
- [Makers] [1/?] Machine names...
Adam Thomas
- [Makers] [1/?] Machine names...
Angus Gratton
- [Makers] [1/?] Machine names...
Alastair D'Silva
- [Makers] [1/?] Machine names...
Chris Wolfe
- [Makers] [1/?] Machine names...
Matt Evans
- [Makers] [1/?] Machine names...
Brad Hards
- [Makers] [1/?] Machine names...
Angus Gratton
- [Makers] [1/?] Machine names...
Eyal Lebedinsky
- [Makers] [1/?] Machine names...
Alastair D'Silva
- [Makers] [1/?] Machine names...
Brad Hards
- [Makers] [1/?] Machine names...
Angus Gratton
- [Makers] [1/?] Machine names...
Alastair D'Silva
- [Makers] [Canberrauav] Talk on the UAV project for CLUG?
Alastair D'Silva
- [Makers] [Canberrauav] Talk on the UAV project for CLUG?
Angus Gratton
- [Makers] [FS] 2x2GB DDR2 SoDIMM
Alastair D'Silva
- [Makers] Adam & I applying to present @ Electrofringe
Angus Gratton
- [Makers] Adam on hackaday
Angus Gratton
- [Makers] Anyone for ridiculous high voltage rectifier diodes?
Angus Gratton
- [Makers] Anyone for ridiculous high voltage rectifier diodes?
Tristan Steele
- [Makers] Anyone for ridiculous high voltage rectifier diodes?
Lemming .
- [Makers] Anyone for ridiculous high voltage rectifier diodes?
Sam
- [Makers] Anyone for ridiculous high voltage rectifier diodes?
Lemming .
- [Makers] Anyone for ridiculous high voltage rectifier diodes?
Angus Gratton
- [Makers] Anyone for ridiculous high voltage rectifier diodes?
Lemming .
- [Makers] Anyone have access to a car trailer or similar?
Angus Gratton
- [Makers] Anyone have access to a car trailer or similar?
Mish9000
- [Makers] Anyone have access to a car trailer or similar?
Dave Woodgate
- [Makers] Anyone have access to a car trailer or similar?
Mish9000
- [Makers] Anyone have access to a car trailer or similar?
Angus Gratton
- [Makers] Anyone have access to a car trailer or similar?
Bernard Duggan
- [Makers] Anyone have access to a car trailer or similar?
Jack Pittar
- [Makers] Anyone have access to a car trailer or similar?
Angus Gratton
- [Makers] Anyone have access to a car trailer or similar?
Adam Thomas
- [Makers] Anyone have a USB IR receiver?
Angus Gratton
- [Makers] Anyone have a USB IR receiver?
Alastair D'Silva
- [Makers] Anyone have a wheelie bin or similar?
Angus Gratton
- [Makers] Barcamp 2011 Talks
Alastair D'Silva
- [Makers] BarCamp stuff & "Our Space" page [was Re: Space open from 7 tonight. ]
Angus Gratton
- [Makers] BarCamp stuff & "Our Space" page [was Re: Space open from 7 tonight. ]
Dean K
- [Makers] Blog API: RE: Canberra UAV Bottle Drop
Alastair D'Silva
- [Makers] Blog API: RE: Canberra UAV Bottle Drop
chris at australianrobotics.com.au
- [Makers] Blue soldering iron has died :(
Angus Gratton
- [Makers] Blue soldering iron has died :(
Jack Pittar
- [Makers] Blue soldering iron has died :(
Angus Gratton
- [Makers] Blue soldering iron has died :(
Jack Pittar
- [Makers] Bringing Nearly working Makerbot Tonight.
Matthew Dormer
- [Makers] Bringing Nearly working Makerbot Tonight.
Angus Gratton
- [Makers] Call for contributors: Ardupilot port to MHVLib
Alastair D'Silva
- [Makers] Canberra Day Hacking
Angus Gratton
- [Makers] Canberra UAV Bottle Drop
Christopher Lee
- [Makers] Can I borrow a data projector?
Adam Thomas
- [Makers] Can I borrow a data projector?
Luis Felipe Arango
- [Makers] CD Drive box
Alastair D'Silva
- [Makers] Cheap FETs for LED matrix
Alastair D'Silva
- [Makers] Cheap FETs for LED matrix
Adam Thomas
- [Makers] Cheap FETs for LED matrix
Luis Felipe Arango
- [Makers] Clamps
Alastair D'Silva
- [Makers] Club Discount for Australian Robotics
Christopher Lee
- [Makers] CNC Mill is up
Alastair D'Silva
- [Makers] Committee Digest, Vol 11, Issue 26
Moss, Andrew
- [Makers] Desoldering a C64
Alastair D'Silva
- [Makers] Desoldering a C64
Jack Pittar
- [Makers] Desoldering a C64
Alastair D'Silva
- [Makers] Desoldering a C64
Brad Hards
- [Makers] Desoldering a C64
Jack Pittar
- [Makers] Desoldering a C64
Alastair D'Silva
- [Makers] Desoldering a C64
Jack Pittar
- [Makers] Desoldering a C64
Alastair D'Silva
- [Makers] Distant hacker seeking glazing
Adam Thomas
- [Makers] Distant hacker seeking glazing
James Finniss
- [Makers] Distant hacker seeking glazing
James Finniss
- [Makers] Distant hacker seeking glazing
Lana Brindley
- [Makers] Distant hacker seeking glazing
Alastair D'Silva
- [Makers] Emergency: nerd without computer :(
James Finniss
- [Makers] Emergency: nerd without computer :(
James Finniss
- [Makers] Emergency: nerd without computer :(
Alastair D'Silva
- [Makers] Emergency: nerd without computer :(
Chris Lee
- [Makers] Emergency: nerd without computer :(
James Finniss
- [Makers] Files & Rasps
Alastair D'Silva
- [Makers] Files & Rasps
frazer brown
- [Makers] Files & Rasps
Alastair D'Silva
- [Makers] Files & Rasps
frazer brown
- [Makers] Files & Rasps
Jack Pittar
- [Makers] Files & Rasps
frazer brown
- [Makers] Files & Rasps
Brad Hards
- [Makers] Files & Rasps
Chris Wolfe
- [Makers] Files & Rasps
Alastair D'Silva
- [Makers] Files & Rasps
Chris Wolfe
- [Makers] Files & Rasps
Angus Gratton
- [Makers] Files & Rasps
James Finniss
- [Makers] Final call for Barcamp Canberra 2011 tickets
Alastair D'Silva
- [Makers] Free 15" VGA LCD Touchscreens
Alastair D'Silva
- [Makers] Free 15" VGA LCD Touchscreens
Lemming .
- [Makers] Free 15" VGA LCD Touchscreens
Lemming .
- [Makers] Free 15" VGA LCD Touchscreens
Alastair D'Silva
- [Makers] Free 15" VGA LCD Touchscreens
Alastair D'Silva
- [Makers] Free 15" VGA LCD Touchscreens
Luis Felipe Arango
- [Makers] Free 15" VGA LCD Touchscreens
Bernard Duggan
- [Makers] Free 15" VGA LCD Touchscreens
Sam Bobroff
- [Makers] Free 15" VGA LCD Touchscreens
Angus Gratton
- [Makers] Free 15" VGA LCD Touchscreens
frazer brown
- [Makers] Free 15" VGA LCD Touchscreens
Travis Heinrich
- [Makers] Free 15" VGA LCD Touchscreens
Matthew Dormer
- [Makers] Free 15" VGA LCD Touchscreens
Julie Smith
- [Makers] Free 15" VGA LCD Touchscreens
Alastair D'Silva
- [Makers] Fwd: [artifactory-core] Fwd: Re: London Hackspace hackvan
Ryan Leach
- [Makers] Fwd: A hackable robotic platform with Video - Spy Video TRAKR
Luis Felipe Arango
- [Makers] Fwd: A hackable robotic platform with Video - Spy Video TRAKR
Chris Wolfe
- [Makers] Fwd: A hackable robotic platform with Video - Spy Video TRAKR
Angus Gratton
- [Makers] Fwd: A hackable robotic platform with Video - Spy Video TRAKR
Chris Wolfe
- [Makers] Fwd: A hackable robotic platform with Video - Spy Video TRAKR
Luis Felipe Arango
- [Makers] Fwd: A hackable robotic platform with Video - Spy Video TRAKR
Angus Gratton
- [Makers] Group buy: LPC1768 development board
Alastair D'Silva
- [Makers] Group buy: LPC1768 development board
Eyal Lebedinsky
- [Makers] Group buy: LPC1768 development board
Alistair Riddell
- [Makers] Group buy: LPC1768 development board
Alastair D'Silva
- [Makers] Group buy: LPC1768 development board
Eyal Lebedinsky
- [Makers] Hackerspace closed
shinobi.jack at gmail.com
- [Makers] Hackerspace now open Thursdays
Angus Gratton
- [Makers] Hackerspace open ICSP on hand
shinobi.jack at gmail.com
- [Makers] Hackerspace Seeks Committee Member
Angus Gratton
- [Makers] Heads up: RCD testing on Thursday
Alastair D'Silva
- [Makers] Help Needed This Arvo [was: trailer,oil,bench,Sunday ]
Angus Gratton
- [Makers] HobbyKing brand servos
Chris Wolfe
- [Makers] HobbyKing brand servos
jm
- [Makers] HobbyKing brand servos
Chris Wolfe
- [Makers] HobbyKing brand servos
jm
- [Makers] HobbyKing brand servos
Chris Wolfe
- [Makers] HobbyKing brand servos
Chris Wolfe
- [Makers] ISCP for arduino
Moss, Andrew
- [Makers] ISCP for arduino
Adam Thomas
- [Makers] Junk to be removed from the space
Alastair D'Silva
- [Makers] Junk to be removed from the space
Matt Evans
- [Makers] Junk to be removed from the space
Chris Wolfe
- [Makers] Junk to be removed from the space
Alastair D'Silva
- [Makers] Junk to be removed from the space
Chris Wolfe
- [Makers] Junk to be removed from the space
Angus Gratton
- [Makers] Junk to be removed from the space
Alastair D'Silva
- [Makers] Junk to be removed from the space
shinobi.jack at gmail.com
- [Makers] Junk to be removed from the space
Angus Gratton
- [Makers] Junk to be removed from the space
Alastair D'Silva
- [Makers] Junk to be removed from the space
Matt Evans
- [Makers] Junk to be removed from the space
Alastair D'Silva
- [Makers] Junk to be removed from the space
Chris Wolfe
- [Makers] Junk to be removed from the space
Alastair D'Silva
- [Makers] Lift to the meeting tonight
Alastair D'Silva
- [Makers] Lift to the meeting tonight
Angus Gratton
- [Makers] Lift to the space
Alastair D'Silva
- [Makers] Lift to the space
Adam Thomas
- [Makers] Lift to the space
Chris Wolfe
- [Makers] Light weight exo-skeleton! This is a step away from the Appleseed suits!
Chris Wolfe
- [Makers] Linux Distro for LAMP Server?
Christopher Lee
- [Makers] Linux Distro for LAMP Server?
Angus Gratton
- [Makers] Linux Distro for LAMP Server?
jcda Diomard Arrazau
- [Makers] Linux Distro for LAMP Server?
Colin Nash
- [Makers] Linux Distro for LAMP Server?
Christopher Lee
- [Makers] Linux Distro for LAMP Server?
Luis Felipe Arango
- [Makers] Makers' Meeting tonight
Alastair D'Silva
- [Makers] MHVBoards in the space
Alastair D'Silva
- [Makers] MHV Plotter Problems and Fixing
Jess Drake
- [Makers] MHV Plotter Problems and Fixing
Jess Drake
- [Makers] MHV Plotter Problems and Fixing
Alastair D'Silva
- [Makers] MHV Plotter Problems and Fixing
Angus Gratton
- [Makers] MHV Plotter Problems and Fixing
Alastair D'Silva
- [Makers] MHV Plotter Problems and Fixing
Luis Felipe Arango
- [Makers] MHV Poster!
Christopher Lee
- [Makers] mini spot welder
Mish9000
- [Makers] Mouser order
Alastair D'Silva
- [Makers] Mouser order
Angus Gratton
- [Makers] Mouser order
Adam Thomas
- [Makers] NASA OPEN DAY YAY
Matt Evans
- [Makers] NASA OPEN DAY YAY
Wilson Cletus
- [Makers] No CNC goodness tonight
Alastair D'Silva
- [Makers] No CNC goodness tonight
Angus Gratton
- [Makers] PCB-gcode output wanted
Angus Gratton
- [Makers] PCB Engraver Interposer
Alastair D'Silva
- [Makers] Potentially sporadic openness of the space today.
Adam Thomas
- [Makers] Potentially sporadic openness of the space today.
Angus Gratton
- [Makers] Potentially sporadic openness of the space today.
Chris Wolfe
- [Makers] Power8 drill home moved
Angus Gratton
- [Makers] Power8 drill home moved
Chris Wolfe
- [Makers] Power bus for lockers
Alastair D'Silva
- [Makers] Power bus for lockers
Christopher Lee
- [Makers] Power bus for lockers
Angus Gratton
- [Makers] Power bus for lockers
Alastair D'Silva
- [Makers] Power bus for lockers
Christopher Lee
- [Makers] Power bus for lockers
Chris Wolfe
- [Makers] Power Supplies
James Finniss
- [Makers] Power Supplies
shinobi.jack at gmail.com
- [Makers] Power Supplies
jm
- [Makers] Power Supplies
frazer brown
- [Makers] Power Supplies
shinobi.jack at gmail.com
- [Makers] Power Supplies
jm
- [Makers] Power Supplies
Angus Gratton
- [Makers] Power Supplies
jm
- [Makers] Power Supplies
frazer brown
- [Makers] Power Supplies
James Finniss
- [Makers] quadcopter (aka maimbot)
tridge at samba.org
- [Makers] Questions for members with gear loaned to the space
Angus Gratton
- [Makers] Questions for members with gear loaned to the space
Angus Gratton
- [Makers] Questions for members with gear loaned to the space
Angus Gratton
- [Makers] Quickcircuit probes
Alastair D'Silva
- [Makers] Reminder: One week to Junk D-Day
Angus Gratton
- [Makers] Reminder: One week to Junk D-Day
Alastair D'Silva
- [Makers] Reminder: One week to Junk D-Day
Chris Wolfe
- [Makers] Reminder: Rat Patrol FloaTILLA 2011 THIS WEEKEND!
Jess Drake
- [Makers] Review Request: isolation transformer safety
Angus Gratton
- [Makers] Review Request: isolation transformer safety
Alastair D'Silva
- [Makers] Review Request: isolation transformer safety
Angus Gratton
- [Makers] Roland plotter
Alastair D'Silva
- [Makers] Roland plotter
Adam Thomas
- [Makers] RTOS for ARM machines
Alastair D'Silva
- [Makers] Second chance draw for Brad's junk
Brad Hards
- [Makers] Second chance draw for Brad's junk
Alastair D'Silva
- [Makers] Sega mega drive
Mishka Talent
- [Makers] Sega mega drive
Chris Wolfe
- [Makers] SMT soldering problem
Nic Schraudolph
- [Makers] SMT soldering problem
James Finniss
- [Makers] SMT soldering problem
Lemming .
- [Makers] SMT soldering problem
Nic Schraudolph
- [Makers] Space internet recharged
Angus Gratton
- [Makers] space is open
Adam Thomas
- [Makers] Space is open
Angus Gratton
- [Makers] Space now open until 5pm
Angus Gratton
- [Makers] Space now open until 5pm
Alastair D'Silva
- [Makers] Space now open until 5pm
Angus Gratton
- [Makers] space open?
James Finniss
- [Makers] space open?
Angus Gratton
- [Makers] Space open for about 2h
Matt Evans
- [Makers] Space open from 630pm
Jess Drake
- [Makers] Space open from 7:00
Adam Thomas
- [Makers] Space open from 7 tonight.
Adam Thomas
- [Makers] Space open from 7 tonight.
Alastair D'Silva
- [Makers] Space open from 7 tonight.
Adam Thomas
- [Makers] Space open in 5
Adam Thomas
- [Makers] Space open Sat 2.15ish
Matt Evans
- [Makers] Spaceport will be opened at 6:30pm
Chris Wolfe
- [Makers] Spaceport will be opened at 6:30pm
tridge at samba.org
- [Makers] Spaceport will be open from about 8:30 till late.
Chris Wolfe
- [Makers] Spaceport will be open from about 8:30 till late.
Chris Wolfe
- [Makers] Space will be open 2:15pm
Angus Gratton
- [Makers] Space will be open 2:15pm
Angus Gratton
- [Makers] Space will be open 2:15pm
Chris Wolfe
- [Makers] successful flight of the 'maimbot'
tridge at samba.org
- [Makers] successful flight of the 'maimbot'
jvcougar at tpg.com.au
- [Makers] successful flight of the 'maimbot'
Chris Wolfe
- [Makers] successful flight of the 'maimbot'
jm
- [Makers] Thanks for helping sort out my junk
Alastair D'Silva
- [Makers] Thanks for helping sort out my junk
Angus Gratton
- [Makers] Thanks for helping sort out my junk
Alastair D'Silva
- [Makers] Thanks for helping sort out my junk
Chris Wolfe
- [Makers] Thanks for helping sort out my junk
Alastair D'Silva
- [Makers] The PCB engraver lives!
Angus Gratton
- [Makers] The space is now open
Angus Gratton
- [Makers] Thought you might be interested
James Finniss
- [Makers] trailer,oil,bench,Sunday
Jack Pittar
- [Makers] Who wants to buy a monitor for the space?
Angus Gratton
- [Makers] Who wants to buy a monitor for the space?
Adam Thomas
- [Makers] Who wants to buy a monitor for the space?
frazer brown
Last message date:
Thu Mar 31 23:23:34 EST 2011
Archived on: Thu Mar 31 23:24:33 EST 2011
This archive was generated by
Pipermail 0.09 (Mailman edition).