February 2011 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Feb 1 22:51:21 EST 2011
Ending: Mon Feb 28 19:49:07 EST 2011
Messages: 236

• [Makers] Reminder: Lockers going quick   Angus Gratton
• [Makers] Dyesol Tour   Sam Bobroff
  • [Makers] Dyesol Tour   Chris Lee
    • [Makers] Dyesol Tour   Luis Felipe Arango
    • [Makers] Screen printing (was Dyesol Tour)   Alastair D'Silva
• [Makers] Shed open this afternoon?   Chris Lee
  • [Makers] Shed open this afternoon?   Chris Wolfe
    • [Makers] Shed open this afternoon?   Chris Lee
      • [Makers] Shed open this afternoon?   Chris Wolfe
• [Makers] Working PCs with CD drive?   Chris Wolfe
  • [Makers] Working PCs with CD drive?   Alastair D'Silva
    • [Makers] Working PCs with CD drive?   Angus Gratton
      • [Makers] Working PCs with CD drive?   Alastair D'Silva
  • [Makers] Working PCs with CD drive?   Angus Gratton
    • [Makers] Working PCs with CD drive?   Chris Wolfe
      • [Makers] Working PCs with CD drive?   Angus Gratton
      • [Makers] Working PCs with CD drive?   Chris Wolfe
      • [Makers] Working PCs with CD drive?   Angus Gratton
• [Makers] Space will be open from 5:30   Angus Gratton
• [Makers] PCB Engraver   Alastair D'Silva
  • [Makers] PCB Engraver   Adam Thomas
• [Makers] Embedded Linux board   Angus Gratton
• [Makers] Space open from 3   Adam Thomas
  • [Makers] Space open from 3   Adam Thomas
• [Makers] space closed [nt]   Adam Thomas
  • [Makers] space closed [nt]   Christopher Lee
    • [Makers] space closed [nt]   shinobi.jack at gmail.com
• [Makers] Possible MSP hacking today   shinobi.jack at gmail.com
• [Makers] RFM22B Module- what frequency should I get?   Christopher Lee
  • [Makers] RFM22B Module- what frequency should I get?   shinobi.jack at gmail.com
  • [Makers] RFM22B Module- what frequency should I get?   Moss, Andrew
    • [Makers] RFM22B Module- what frequency should I get?   Dave Woodgate
  • [Makers] RFM22B Module- what frequency should I get?   Dave Woodgate
• [Makers] Space open at 12   shinobi.jack at gmail.com
• [Makers] Space now open   shinobi.jack at gmail.com
  • [Makers] Space now open   Dave Woodgate
    • [Makers] Space now open   Dave Woodgate
• [Makers] Hackerspace shut   Geoff Swan
• [Makers] Barcamp Canberra tickets available   Alastair D'Silva
• [Makers] Opening Maker Space today   Christopher Lee
• [Makers] The hackerspace is open [nt]   Adam Thomas
  • [Makers] The hackerspace is open [nt]   Geoff Swan
• [Makers] Seeking Bench Power Supply   jm
  • [Makers] Seeking Bench Power Supply   Luis Felipe Arango
    • [Makers] Seeking Bench Power Supply   jm
• [Makers] CNC Gear on Graysonline   Alastair D'Silva
• [Makers] Sparkfun Order   Christopher Lee
  • [Makers] Sparkfun Order   Chris Wolfe
• [Makers] Matt on hackaday.   shinobi.jack at gmail.com
• [Makers] Selling iPad 16GB WiFi   Cameron Moon
  • [Makers] Selling iPad 16GB WiFi   Cameron Moon
• [Makers] locks [SEC=UNOFFICIAL]   Jack.Pittar at ga.gov.au
• [Makers] AVR programmers   Paul Warren
  • [Makers] AVR programmers   Adam Thomas
    • [Makers] AVR programmers   Angus Gratton
      • [Makers] AVR programmers   shinobi.jack at gmail.com
      • [Makers] AVR programmers   James Finniss
• [Makers] kopin cyberdisplay ulta small (wearable) displays - group buy?   Geoff Swan
  • [Makers] kopin cyberdisplay ulta small (wearable) displays - group buy?   Luis Felipe Arango
    • [Makers] kopin cyberdisplay ulta small (wearable) displays - group buy?   Geoff Swan
• [Makers] locks   Jack Pittar
• [Makers] All unsorted tools & junk now piled in the bund   Angus Gratton
• [Makers] O2 prices   Rodger Sutherland
  • [Makers] O2 prices   Sam Bobroff
    • [Makers] O2 prices   Tristan Steele
      • [Makers] O2 prices   Sam Bobroff
      • [Makers] O2 prices   Tristan Steele
      • [Makers] O2 prices   Sam Bobroff
• [Makers] old CNC stuff is poorly documented   Adam Thomas
  • [Makers] old CNC stuff is poorly documented   Alastair D'Silva
    • [Makers] old CNC stuff is poorly documented   Mish9000
      • [Makers] old CNC stuff is poorly documented   Adam Thomas
      • [Makers] old CNC stuff is poorly documented   Angus Gratton
      • [Makers] old CNC stuff is poorly documented   Adam Thomas
      • [Makers] old CNC stuff is poorly documented   Mish9000
      • [Makers] old CNC stuff is poorly documented   Matt Evans
      • [Makers] old CNC stuff is poorly documented   Alastair D'Silva
      • [Makers] old CNC stuff is poorly documented   Matt Evans
      • [Makers] old CNC stuff is poorly documented   Mish9000
      • [Makers] old CNC stuff is poorly documented   Mish9000
      • [Makers] old CNC stuff is poorly documented   Alastair D'Silva
      • [Makers] old CNC stuff is poorly documented   Alastair D'Silva
• [Makers] Matt made it onto Hackaday   Alastair D'Silva
• [Makers] 7805 Regulators   Alastair D'Silva
• [Makers] open space   Jack Pittar
  • [Makers] open space   Chris Wolfe
• [Makers] Electronics Samples Reviews   Christopher Lee
• [Makers] Space will be open   David Woodgate
  • [Makers] Space will be open   David Woodgate
• [Makers] Maker Meetings back to fortnightly   Angus Gratton
• [Makers] Old computers   deece at newmillennium.net.au
• [Makers] Space is open   deece at newmillennium.net.au
  • [Makers] Space is open   Christopher Lee
  • [Makers] Space is open   Adam Thomas
• [Makers] Space open by 2:30 this afternoon - Sorting   Angus Gratton
  • [Makers] Space open by 2:30 this afternoon - Sorting   Angus Gratton
    • [Makers] Space open by 2:30 this afternoon - Sorting   Chris Wolfe
      • [Makers] Space open by 2:30 this afternoon - Sorting   Angus Gratton
    • [Makers] Space open by 2:30 this afternoon - Sorting   Alastair D'Silva
      • [Makers] Space open by 2:30 this afternoon - Sorting   Adam Thomas
      • [Makers] Space open by 2:30 this afternoon - Sorting   Chris Wolfe
• [Makers] Goings on in the hackerspace today   Adam Thomas
• [Makers] [Canberrauav] Website updated   Moss, Andrew
• [Makers] Filming planned for next maker meetup   Adam Thomas
• [Makers] getting more female members   Jess Drake
  • [Makers] getting more female members   Adam Thomas
  • [Makers] getting more female members   Alastair D'Silva
    • [Makers] getting more female members   Mish9000
      • [Makers] getting more female members   Dave Woodgate
      • [Makers] getting more female members   Adam Thomas
      • [Makers] getting more female members   Francis Markham
      • [Makers] getting more female members   Jess Drake
      • [Makers] getting more female members   Angus Gratton
      • [Makers] getting more female members   Lana Brindley
  • [Makers] getting more female members   Eyal Lebedinsky
    • [Makers] getting more female members   Adam Thomas
      • [Makers] getting more female members   Elena Williams
      • [Makers] getting more female members   Eyal Lebedinsky
      • [Makers] getting more female members   Jess Drake
      • [Makers] getting more female members   Alastair D'Silva
      • [Makers] getting more female members   Jess Drake
      • [Makers] getting more female members   Tristan Steele
      • [Makers] getting more female members   Adam Thomas
      • [Makers] getting more female members   Elena Williams
      • [Makers] getting more female members   Alistair Riddell
• [Makers] Open Bench Logic Sniffer - chip ins.   Adam Thomas
• [Makers] Weird Design concepts (Art-Electronics)   Luis Felipe Arango
  • [Makers] Weird Design concepts (Art-Electronics)   Mish9000
• [Makers] Murals & sign for the space   Jess Drake
  • [Makers] Fwd: Murals & sign for the space   frazer brown
    • [Makers] Murals & sign for the space   frazer brown
      • [Makers] Murals & sign for the space   Lana Brindley
      • [Makers] Murals & sign for the space   frazer brown
      • [Makers] Murals & sign for the space   Jack Pittar
      • [Makers] Murals & sign for the space   frazer brown
      • [Makers] Murals & sign for the space   Lemming .
    • [Makers] Fwd: Murals & sign for the space   Alastair D'Silva
• [Makers] [Canberrauav] meetings   Moss, Andrew
  • [Makers] [Canberrauav] meetings   Chris Wolfe
• [Makers] Space now open till about 10pm   David Woodgate
• [Makers] Stuff left in the space   Alastair D'Silva
  • [Makers] Stuff left in the space   Adam Thomas
  • [Makers] Stuff left in the space   Peter Edmunds
• [Makers] First attempt at stencil art   Chris Wolfe
  • [Makers] First attempt at stencil art   Chris Lee
  • [Makers] First attempt at stencil art   Alastair D'Silva
    • [Makers] First attempt at stencil art   Chris Wolfe
      • [Makers] First attempt at stencil art   Alastair D'Silva
      • [Makers] First attempt at stencil art   Chris Wolfe
• [Makers] Symbian 3 vs. Android   frazer brown
• [Makers] Converted Weber pizza oven   Angus Gratton
• [Makers] Firebricks, casting mix etc   Sam Bobroff
  • [Makers] Firebricks, casting mix etc   Mish9000
    • [Makers] Firebricks, casting mix etc   Jess Drake
      • [Makers] Firebricks, casting mix etc   Chris Wolfe
      • [Makers] Firebricks, casting mix etc   jm
      • [Makers] Firebricks, casting mix etc   Chris Wolfe
      • [Makers] Firebricks, casting mix etc   Mish9000
• [Makers] Webcam / motion detection software   Brenda Moon
  • [Makers] Webcam / motion detection software   Adam Thomas
  • [Makers] Webcam / motion detection software   Angus Gratton
  • [Makers] Webcam / motion detection software   Alastair D'Silva
• [Makers] CNC at Pickles   Mishka Talent
  • [Makers] CNC at Pickles   Alastair D'Silva
    • [Makers] CNC at Pickles   Mishka Talent
      • [Makers] CNC at Pickles   Alastair D'Silva
      • [Makers] CNC at Pickles   Matt Evans
      • [Makers] CNC at Pickles   Angus Gratton
      • [Makers] CNC at Pickles   Mish9000
      • [Makers] CNC at Pickles   Jack Pittar
      • [Makers] CNC at Pickles   Alastair D'Silva
      • [Makers] CNC at Pickles   Angus Gratton
      • [Makers] CNC at Pickles   Mish9000
      • [Makers] CNC at Pickles   Angus Gratton
      • [Makers] CNC at Pickles   Jess Drake
      • [Makers] CNC at Pickles   Alastair D'Silva
• [Makers] CNC at pickles tomorrow   Mish9000
• [Makers] Space open - Probably until about 10pm   Dave Woodgate
  • [Makers] Space open - Probably until about 10pm   Chris Wolfe
• [Makers] Has anyone seen this error before?   Chris Wolfe
  • [Makers] Has anyone seen this error before?   Chris Wolfe
  • [Makers] Has anyone seen this error before?   Adam Thomas
    • [Makers] Has anyone seen this error before?   Chris Wolfe
      • [Makers] Has anyone seen this error before?   Adam Thomas
      • [Makers] Has anyone seen this error before?   Chris Wolfe
      • [Makers] Has anyone seen this error before?   Chris Wolfe
• [Makers] Space now open - for a few hours   David Woodgate
• [Makers] Space open ~10:30 - 12:30 [nt]   Adam Thomas
• [Makers] Casting alginate   frazer brown
  • [Makers] Casting alginate   Chris Wolfe
• [Makers] Shed open Sunday afternoon ?   Chris Lee
• [Makers] Any one for some hacking tonight?   Adam Thomas
  • [Makers] Any one for some hacking tonight?   Chris Lee
    • [Makers] Any one for some hacking tonight?   Adam Thomas
      • [Makers] Any one for some hacking tonight?   Angus Gratton
• [Makers] ZipIt z2 wifi+bootloader   Angus Gratton
  • [Makers] ZipIt z2 wifi+bootloader   Alistair Riddell
    • [Makers] ZipIt z2 wifi+bootloader   Geoff Swan
      • [Makers] ZipIt z2 wifi+bootloader   Geoff Swan
• [Makers] Printing onto clear stickies   Moss, Andrew
  • [Makers] Printing onto clear stickies   Alastair D'Silva
  • [Makers] Printing onto clear stickies   Jack Pittar
• [Makers] Recent Photos, 555 Firefly, UAV test flight #3   Christopher Lee
  • [Makers] Recent Photos, 555 Firefly, UAV test flight #3   Adam Thomas
• [Makers] Space open tonight   Adam Thomas
• [Makers] Homebrew   frazer brown
  • [Makers] Homebrew   Jess Drake
    • [Makers] Homebrew   frazer brown
• [Makers] opening space   Jack Pittar
• [Makers] Anyone have access to a car trailer or similar?   Angus Gratton
• [Makers] Floro light fixtures   Moss, Andrew
• [Makers] Electric Vehicles - Canberra Division Technical Presentation - 1 March 2011   Dave Woodgate
• [Makers] Fwd: Outback Challenge - Sponsorship Opportunity   Christopher Lee
• [Makers] Space open briefly   shinobi.jack at gmail.com
• [Makers] Space open this afternoon/evening   Angus Gratton
  • [Makers] Space open this afternoon/evening   shinobi.jack at gmail.com
• [Makers] The PCB engraver lives!   Angus Gratton
  • [Makers] The PCB engraver lives!   Christopher Lee
  • [Makers] The PCB engraver lives!   Alastair D'Silva
    • [Makers] The PCB engraver lives!   Adam Thomas
      • [Makers] The PCB engraver lives!   Angus Gratton
      • [Makers] The PCB engraver lives!   Alastair D'Silva
      • [Makers] The PCB engraver lives!   Angus Gratton
      • [Makers] The PCB engraver lives!   Angus Gratton
      • [Makers] The PCB engraver lives!   Mish9000
      • [Makers] The PCB engraver lives!   Angus Gratton
• [Makers] Reprap   Alastair D'Silva
  • [Makers] Reprap   Matt Evans
    • [Makers] Reprap   Alastair D'Silva
      • [Makers] Reprap   Matt Evans
      • [Makers] Reprap   Alastair D'Silva
• [Makers] Mhv Lib Mention   Chris Lee
• [Makers] iPhone/iPad/Android App   Jess Drake
  • [Makers] iPhone/iPad/Android App   Dean K
• [Makers] The spaceport is now open for a few hours.   Chris Wolfe
• [Makers] Fwd: [clug] really cheap linux laptop   Eyal Lebedinsky

Last message date: Mon Feb 28 19:49:07 EST 2011
Archived on: Mon Feb 28 19:49:56 EST 2011

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...