Other
MHVBoard Useful Information
deece — Sat, 10/12/2011 - 11:16pm
JP4 pinout
The right angle connector has the following pinout (starting from the pin near JP1):
Here are some common problems you might encounter when using your MHVBoard.
Getting Started with the MHVBoard in the Arduino Environment
The MHVBoard will work within the Arduino environment.
MHVBoard R2 Assembly Instructions
Tools
You will need the following tools to assemble your MHVBoard:
- Soldering iron with a fine tip (25W will do)
- Solder (the PCB is ROHS compliant if you want to use lead-free solder, but lead based solder is easier to work with)
- Needle-nose pliers
- Side cutters
- Multimeter
- Blu-tack
